NUMBER IN PARENTHESES IS SHIPPING WEIGHT

BLUE WEAVE

A polypropylene, heat-shrinking screen - the screen we use on our Basic & Student Moulds. We like it because it has a good surface for sheet formation, has good drainage and it easily tightens if it ever starts to sag. Ask for our free gluing instructions & be sure to order our Epoxy Paste. Sold by the linear foot, or by the square foot for cut-to-size pieces. 65" wide.

SC-BLUE-F $11.50 (OS) per linear foot
SC-BLUE-C $5.75(OS) per sq. ft. cut-to-size

39 MESH

Stiff, yet lightweight; an ideal top surface for large double screen moulds. We use this on our Simple & Apprentice moulds. 40" wide. Width & price specifications subject to change - call for availability & current price.

SC-39-F $12.95 (OS) per linear foot

6 x 6 POLYESTER

Lightweight white backing especially useful for large moulds when weight is a consideration. It is used in combination with either brass or polyester top surfaces. 56" wide.

SC-POLY6X6-F $34.50 (OS) per linear foot

40 MESH BRASS

The brass surface screen we use on our Custom Moulds. A perfect surface for woven paper; provides excellent drainage. 36" wide.

SC-BRS40-F $13.50 (OS) per linear foot

8 x 8 MESH BRASS

A heavy wire brass mesh used in backing the 40 Mesh surface to provide support and even drainage. 36" wide.

SC-BRS8X8-F $25.00 (OS) per linear foot

LAID SURFACE

Laid wire surfaces were traditional on Western paper moulds before the Industrial Revolution. Our laid surface is made of phosphor bronze wire with 1" chain spacing. 19 wires per inch laid lines. One square foot minimum.

SC-LAID *Special Order Only* $101.25 (OS) per sq. ft. cut-to-size

10 x 10 BRONZE BACKING

Used as a backing wire for the Laid Surface, this light weight bronze screen produces a paper with a less pronounced laid pattern. Sold cut-to-size only.

SC-10X10BNZ $28.75 (OS) per sq. ft. cut-to-size

EPOXY PASTE

This is the best adhesive we have ever found for gluing screens onto moulds. We offer a superior Epoxy Paste which comes in a two part formula. It doesn't sag or run like regular epoxies as it has a thicker consistency. It works well for joints, too. Mixes easily; sets in one hour and cures overnight. Ask us for gluing instructions when you order. Sold in quarts (two 16-oz. cans) Sorry, pints are no longer available.

MM-EPOXY QUART $40.00 (1.5)

FLAT BRASS 3/8"

Used for edging the screen on traditional moulds.

MM-BRASS-FL $1.50 (.1) per linear foot

FLAT BRASS 1"

This width is used on the moulds for flat brass trim, where the bottom edge has been rounded.

MM-BRS-1/4 $2.75 (.1) per linear foot

FLAT BRASS 1-3/8"

This width is also used on the moulds for flat brass trim.

MM-BRS-1+-FL $2.75 (.1) per linear foot

BRASS ESCUTCHEON PINS

Well-formed nails with round heads (3/8" x #17 wire gauge) that work beautifully in attaching brass to the mould. Approx. 150 nails per ounce.

MM-PINS $4.75 (.1) per ounce

3" FLAT CORNERS

We make these flat brass corners for corner protection. Ready to be nailed to the mould.

MM-CORNRS-FL $17.25 (.1) each

BRASS HALF-ROUND CORNERS

For the bottom edge of the moulds. Used with rub strips, adds strength & protection

MM-CORNRS-RN $34.50 (.15 ) each

WATERMARK SERVICE

Using a photographic process, most designs can be reproduced with varying line widths. Lines should be at least 1/8" apart for clarity. Please supply black and white camera-ready artwork (no pencil, please). Photo-etched magnesium watermarks are available in thicknesses of; .032", .040", or .054." If you want the watermark sewn to your mould, please send a full size sheet with the position and placement of the watermark indicated. (Additional labor charge for our sewing.) We also make traditional bent wire marks on a quote-only basis.

MO-WTRMARK P.O.R. Min. charge is $50.00

CLICK HERE TO RETURN TO TOP